My yes😊😊

Wow 💖💖💖

Thanks for the feedback.

Posting trainer codes for raid recruitment is only permitted on the Code Trading Board.
If you would like to invite each other to raid, please use the Code Trading Board as a place to post your trainer code.

Please post various opinions on this forum, such as impressions and suggestions using the app.

Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.
We will continue to update the mechanism.
Thank you for your continued use.

Continue to improve this very much
FLAWED “ranking system” PLEASE!
I lost 5* rating cause people joining didn’t get a shiny even tho I hosted and invited enough to beat the boss so I’ve been trying to regain my 5* for over a GD YEAR?!? Bring back 1* raids

add more people higher trainer levels…
these bosses are needing upwards of 6 and people are getting pissed wasting
passes on hosts who can’t do them with lower levels and not enough people…GL

Thanks for the feedback.
We apologize for any inconvenience.

It implements the ability to push notifications and alerts to users with incorrect information.
Tap the user's flag to let them know that the user's trainer code is incorrect, so use that.

See below for how to block hosts or guests.

1.Tap the trainer name of the host or guest.
2.When the chat screen opens, tap Circle with diagonal lines displayed in the upper right corner.
3.Select “Block”.
4.The Blocked Users list is displayed in the “Block” on Users page. You can also unblock users here.

Thank you for your continued use.

Thanks for the feedback.
Please tell me the details if there is anything.
We will listen to your opinions and improve the app.
Thank you for your continued use.

*edit* 10 people join then you leave
make another lobby to invite mote

Thanks for the feedback.
The maximum number of people that can be entered remotely is 10.
Thank you for your continued use.

Thanks for the feedback.

When participating in a raid as a guest, there are guest rating limit and trainer level limit.

There are restrictions like the ones above, so if you are unable to participate in the raid due to those limit, you'll need to increase your rating or trainer level.

☆Guest ratings will be accumulated by participating in invited raids.

The rating is based on the participation status of 30 times within 30 days.
If you do not use it, the rating will be invalid, so please join us.
When participating as a guest, please try to match people with a star as much as possible.
If you follow the above, your rating will go up.

If you use Auto Join Free, it will match the best host for you.
Please use all means.

Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.

It implements the ability to push notifications and alerts to users with incorrect information.
Tap the user's flag to let them know that the trainer level or trainer code is incorrect, so use that.

Also, please use the Bad button to rate it.

See below for how to block hosts or guests.

1.Tap the trainer name of the host or guest.
2.When the chat screen opens, tap Circle with diagonal lines displayed in the upper right corner.
3.Select “Block”.
4.The Blocked Users list is displayed in the “Block” on Users page. You can also unblock users here.

Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.
Please report the details of the error from the "Contact Us" link on the "Users Page".
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.

See below for how to invite 9 people.
If you do not have a friend request, please use the kick function.

------------------
Let’s join the Raids with 10 or more trainers including the host and guest so that you can win with confidence even if there are trainers who do not have countermeasures Pokemon ready, low TL trainers, beginner trainers!
Also, if you join the raid with a large number of people, you can defeat them faster and the speed bonus (★5/★3/★1) and mega energy (mega raid) will increase, so it is recommended.

1.First, the host enters the Raid Lobby and invite 5 trainers at once.
By setting the order of Friends to “Friendship” in order of increasing, guests who have just become Friends can be displayed at the top.

2.After confirming that 1 guest trainer has entered the lobby, the host exits there once.

3.The host re-enters the original Raid Lobby.

4.The host Invites additional 4 trainers.
* If the host has access to the gym, can invite additional 5 trainers.
* After the first invitation, there will be a 30 second cooldown time. After 30 seconds, the second invitation will be available.

[rough indication of time schedule]
120 seconds remaining: the first invitation start
110 seconds remaining: the first invitation completed
— 30 seconds cooldown time —
80 seconds remaining: the host confirm that the first guest entryed → the host leaves the room once
70 seconds remaining: the host re-entry / second invitation start
60 seconds remaining: the second invitation (additional invitation) completed
* Set the order of friends to “Friendship” in order of increasing


In this way, Invite as many guests as you can to defeat the boss!
In additional invitations, guest trainers also need smooth participation.
Let’s defeat the boss cooperating everyone!

------------------


Thank you for using GoFriend a lot.
Thanks to someone like you, we can do better development.
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.
As you pointed out, if you are kicked, you cannot rate it.
Since various parts are involved in the system, we are currently considering it.

By using auto join as much as possible and matching with the one with higher rating, the chances of matching with excellent hosts will increase. Please try it.

Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.
Only the host knows why the host kicked you, but we guess, if an acquaintance is invited, your trainer name may be wrong, so check it.
If you used the plug, we will return the plug.
Please contact us from the "Contact" link on the "User Page".
We check the logs.
Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.
We will continue to update GO FRIEND based on your feedback.
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.

For the popular raid boss, it can take several hours or more.
Unplugged auto-preferred joins are kept in order when accessed only once every 180 minutes.

Also, turn on push notifications in the GO FRIEND app and set up to receive status confirmation notifications before the expiration date.
When you receive the notification, check the current standby status in the app.
The state is maintained by accessing once before the 180-minute period expires.
When your number is within 30, you will be notified that the order is near, so please wait with the matching waiting display open.

Please note that the standby state will be reset if you manually join in the middle.
If an error occurs, please restart the app.
It may be fixed after restarting.

Thank you for your continued use.

lol no one LoL

Thanks for the feedback.
We apologize for any inconvenience.
If it is a rare Pokemon and is popular, it may take a few hours or more.
If you have not been invited, please press BAD Rating.
Please use auto join (PlugP, PlugB, PlugF) to match the appropriate host whenever possible.
We will update it every day, so thank you.
Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.
Please report a bug from the "Contact" link on the "Users Page".
We will check your logs and resolve the issue.
Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.
It is Niantic's specifications that the weather changes.
There is no guarantee of the weather.
Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.
We would like to know the details of the error, so please take a screenshot and reply.
Please cooperate with the cause investigation.
Thank you for your continued use.

Thanks for the feedback.
You can find applicable person by searching with the Trainer Name Collective Copy Button.
Also, please do not invite people who do not hit the search.
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.
GOFRIEND features are available without login or screenshot verification.
Because the host is recruiting with guest level restrictions, so you need to raise the level.
We recommend using Auto Join Free.
If that doesn't work, please report the details from the "Contact" link on the "Users Page".
We will check your logs and resolve the issue.
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.
We will continue to update GO FRIEND based on your feedback.
Thank you for your continued use.

Thanks for the feedback.
We have adopted a mechanism in which the number of plugs changes according to the number of people in line.
The more people you actually line up, the more plugs you need (PlugP and PlugB).
Thank you for your continued use.

In other words the more plugs you have, the shorter the line in auto-join is

I could be mistaken

You aren't

Thanks for the feedback.
The bulk copy button has already been implemented.
We will continue to update GO FRIEND based on your feedback.
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience about "screenshot certification".
Currently, if automatic screenshot authentication fails, it will automatically transition to the manual authentication screen, so please try again.
If that doesn't work, please contact us through the "Contact" link on the "Users page".
We will listen to your opinions and improve the app.
Thank you for your continued use.

Thanks for the feedback.
We apologize for any inconvenience.
If you have not been invited using PlugP, we will return PlugP.
Please contact us again through the "Contact" link on the "Users page".
For returns of PlugP, follow the form and please write the raid room number of the raid that used the plug.
We will investigate in order and respond to the return of PlugP.
Also, please cooperate with proper rateing of the host to avoid matching with users who have a bad rateing.
Thank you for your continued use.

Thanks for the feedback.
We apologize for the inconvenience.

By the way, are you copying the trainer code within 80 seconds?
If you do not copy the trainer code within 80 seconds, it will time out.
Make sure you copy the trainer code within 80 seconds of joining and see the checkmark.
If that doesn't work, please report the details of the error from the "Contact Us" link on the "Users Page".
We will investigate the cause.

Thank you for your continued use.

Thanks for the feedback.

Copy the trainer code within 80 seconds to get the checkmark.
If you do not copy the trainer code within 80 seconds, it will time out.
Make sure you copy the trainer code within 80 seconds of joining and see the checkmark.

For your reference, the procedure for applying for a friend is as follows.

1. First, join the raid you want to join
2. Copy the trainer code
3. Launch the Pokemon GO app and tap your icon
4. Move to the friend screen, tap "Add friend" and paste the copied trainer code

Thank you for your continued use.

i think u can start to make your own at a certain leval

Thanks for the feedback.
We apologize for any inconvenience.
We are aware of such issues and are changing or improving the wording of push notifications.
If you have not been invited using PlugP, we will return PlugP.
Please contact us through the "Contact" link on the "Users page".
In addition, rateing function has been implemented.
As a result, only highly rated users are matched.
Please press Good if you have been invited, or Bad if you have not been invited.
Please cooperate with proper rateing to avoid matching with users with bad rateing.
Thank you for your continued use.